Console Output

+ ctest -V --timeout 3600 --no-compress-output -R test_ -T Test
UpdateCTestConfiguration  from :/var/jenkins/workspace/adamantine_PR-387/build/DartConfiguration.tcl
Parse Config file:/var/jenkins/workspace/adamantine_PR-387/build/DartConfiguration.tcl
   Site: 947d7bd54897
   Build name: Linux-c++
Create new tag: 20250623-1756 - Experimental
UpdateCTestConfiguration  from :/var/jenkins/workspace/adamantine_PR-387/build/DartConfiguration.tcl
Parse Config file:/var/jenkins/workspace/adamantine_PR-387/build/DartConfiguration.tcl
Test project /var/jenkins/workspace/adamantine_PR-387/build
Constructing a list of tests
Done constructing a list of tests
Updating test list for fixtures
Added 0 tests to meet fixture requirements
Checking test dependency graph...
Checking test dependency graph end
test 2
      Start  2: test_integration_da_1

2: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_da"
2: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
2: Test timeout computed to be: 3600
2: Running 3 test cases...
2: Entering test module "Integration_Data_Assimilation"
2: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
2: Reading the experimental log file...
2: Done. Log entries found for 1 camera(s), with 2 frame(s).
2: Starting the main time stepping loop...
2: 10% completed
2: 20% completed
2: Performing data assimilation at time 0.0106...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 30% completed
2: 40% completed
2: Performing data assimilation at time 0.0211...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 50% completed
2: 60% completed
2: 70% completed
2: 80% completed
2: 90% completed
2: 100% completed
2: Reading the experimental log file...
2: Done. Log entries found for 1 camera(s), with 2 frame(s).
2: Starting the main time stepping loop...
2: 10% completed
2: 20% completed
2: Performing data assimilation at time 0.0106...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 30% completed
2: 40% completed
2: Performing data assimilation at time 0.0211...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 50% completed
2: 60% completed
2: 70% completed
2: 80% completed
2: 90% completed
2: 100% completed
2: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 55465076us
2: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
2: Reading the experimental log file...
2: Done. Log entries found for 1 camera(s), with 1 frame(s).
2: Starting the main time stepping loop...
2: 10% completed
2: 20% completed
2: Performing data assimilation at time 0.06...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 30% completed
2: 40% completed
2: 50% completed
2: 60% completed
2: 70% completed
2: 80% completed
2: 90% completed
2: 100% completed
2: Reading the experimental log file...
2: Done. Log entries found for 1 camera(s), with 1 frame(s).
2: Starting the main time stepping loop...
2: 10% completed
2: 20% completed
2: Performing data assimilation at time 0.06...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 30% completed
2: 40% completed
2: 50% completed
2: 60% completed
2: 70% completed
2: 80% completed
2: 90% completed
2: 100% completed
2: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 2338955us
2: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
2: Reading the experimental log file...
2: Done. Log entries found for 1 camera(s), with 1 frame(s).
2: Starting the main time stepping loop...
2: 10% completed
2: 20% completed
2: Performing data assimilation at time 0.06...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 30% completed
2: 40% completed
2: 50% completed
2: 60% completed
2: 70% completed
2: 80% completed
2: 90% completed
2: 100% completed
2: Reading the experimental log file...
2: Done. Log entries found for 1 camera(s), with 1 frame(s).
2: Starting the main time stepping loop...
2: 10% completed
2: 20% completed
2: Performing data assimilation at time 0.06...
2: Rank: 0 | Old parameters for member 0: 
2: Rank: 0 | Old parameters for member 1: 
2: Rank: 0 | Old parameters for member 2: 
2: Rank: 0 | Number expt sites mapped to DOFs: 1
2: Getting the perturbed innovation...
2: Applying the Kalman gain...
2: Updating the ensemble members...
2: Done.
2: 30% completed
2: 40% completed
2: 50% completed
2: 60% completed
2: 70% completed
2: 80% completed
2: 90% completed
2: 100% completed
2: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 2412831us
2: Leaving test module "Integration_Data_Assimilation"; testing time: 60217026us
2: 
2: *** No errors detected
2: 
 1/45 Test  #2: test_integration_da_1 ..............   Passed   61.54 sec
test 3
      Start  3: test_integration_da_2

3: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_da"
3: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
3: Test timeout computed to be: 3600
3: Running 3 test cases...
3: Running 3 test cases...
3: Entering test module "Integration_Data_Assimilation"
3: Entering test module "Integration_Data_Assimilation"
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 2 frame(s).
3: Starting the main time stepping loop...
3: Rank: 1 | Old parameters for member 2: 
3: Rank: 1 | Number expt sites mapped to DOFs: 1
3: 10% completed
3: 20% completed
3: Performing data assimilation at time 0.0106...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: Rank: 1 | Old parameters for member 2: 
3: Rank: 1 | Number expt sites mapped to DOFs: 1
3: 40% completed
3: Performing data assimilation at time 0.0211...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: 50% completed
3: 60% completed
3: 70% completed
3: 80% completed
3: 90% completed
3: 100% completed
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 2 frame(s).
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 2 frame(s).
3: Starting the main time stepping loop...
3: Starting the main time stepping loop...
3: 10% completed
3: 10% completed
3: 20% completed
3: 20% completed
3: Performing data assimilation at time 0.0106...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Performing data assimilation at time 0.0106...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: 30% completed
3: 40% completed
3: 40% completed
3: Performing data assimilation at time 0.0211...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Performing data assimilation at time 0.0211...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: Updating the ensemble members...
3: Done.
3: 50% completed
3: 50% completed
3: 60% completed
3: 60% completed
3: 70% completed
3: 70% completed
3: 80% completed
3: 80% completed
3: 90% completed
3: 90% completed
3: 100% completed
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 48394530us
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
3: 100% completed
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 48720214us
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 1 frame(s).
3: Starting the main time stepping loop...
3: Rank: 1 | Old parameters for member 2: 
3: Rank: 1 | Number expt sites mapped to DOFs: 1
3: 10% completed
3: 20% completed
3: Performing data assimilation at time 0.06...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: 40% completed
3: 50% completed
3: 60% completed
3: 70% completed
3: 80% completed
3: 90% completed
3: 100% completed
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 1 frame(s).
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 1 frame(s).
3: Starting the main time stepping loop...
3: Starting the main time stepping loop...
3: 10% completed
3: 10% completed
3: 20% completed
3: 20% completed
3: Performing data assimilation at time 0.06...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Performing data assimilation at time 0.06...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: 40% completed
3: 40% completed
3: 50% completed
3: 50% completed
3: 60% completed
3: 60% completed
3: 70% completed
3: 70% completed
3: 80% completed
3: 80% completed
3: 90% completed
3: 90% completed
3: 100% completed
3: 100% completed
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 2172108us
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 2503747us
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 1 frame(s).
3: Starting the main time stepping loop...
3: Rank: 1 | Old parameters for member 2: 
3: Rank: 1 | Number expt sites mapped to DOFs: 1
3: 10% completed
3: 20% completed
3: Performing data assimilation at time 0.06...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: 40% completed
3: 50% completed
3: 60% completed
3: 70% completed
3: 80% completed
3: 90% completed
3: 100% completed
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 1 frame(s).
3: Reading the experimental log file...
3: Done. Log entries found for 1 camera(s), with 1 frame(s).
3: Starting the main time stepping loop...
3: Starting the main time stepping loop...
3: 10% completed
3: 10% completed
3: 20% completed
3: 20% completed
3: Performing data assimilation at time 0.06...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Performing data assimilation at time 0.06...
3: Rank: 0 | Old parameters for member 0: 
3: Rank: 0 | Old parameters for member 1: 
3: Rank: 0 | Old parameters for member 2: 
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Rank: 0 | Number expt sites mapped to DOFs: 1
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Getting the perturbed innovation...
3: Applying the Kalman gain...
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: Updating the ensemble members...
3: Done.
3: 30% completed
3: 40% completed
3: 40% completed
3: 50% completed
3: 50% completed
3: 60% completed
3: 60% completed
3: 70% completed
3: 70% completed
3: 80% completed
3: 80% completed
3: 90% completed
3: 90% completed
3: 100% completed
3: 100% completed
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 2141814us
3: Leaving test module "Integration_Data_Assimilation"; testing time: 53034280us
3: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 2135908us
3: 
3: *** No errors detected
3: Leaving test module "Integration_Data_Assimilation"; testing time: 53034338us
3: 
3: *** No errors detected
3: 
 2/45 Test  #3: test_integration_da_2 ..............   Passed   53.31 sec
test 4
      Start  4: test_integration_da_3

4: Test command: /opt/openmpi/bin/mpiexec "-n" "3" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_da"
4: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
4: Test timeout computed to be: 3600
4: Running 3 test cases...
4: Running 3 test cases...
4: Running 3 test cases...
4: Entering test module "Integration_Data_Assimilation"
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
4: Entering test module "Integration_Data_Assimilation"
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
4: Entering test module "Integration_Data_Assimilation"
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 2 frame(s).
4: Starting the main time stepping loop...
4: 10% completed
4: 20% completed
4: Performing data assimilation at time 0.0106...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 2 | Old parameters for member 2: 
4: Rank: 1 | Old parameters for member 1: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 2 | Number expt sites mapped to DOFs: 1
4: Rank: 1 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: 40% completed
4: Rank: 2 | Old parameters for member 2: 
4: Performing data assimilation at time 0.0211...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 1 | Old parameters for member 1: 
4: Rank: 2 | Number expt sites mapped to DOFs: 1
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 1 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: 50% completed
4: 60% completed
4: 70% completed
4: 80% completed
4: 90% completed
4: 100% completed
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 2 frame(s).
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 2 frame(s).
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 2 frame(s).
4: Starting the main time stepping loop...
4: Starting the main time stepping loop...
4: Starting the main time stepping loop...
4: 10% completed
4: 10% completed
4: 10% completed
4: 20% completed
4: 20% completed
4: 20% completed
4: Performing data assimilation at time 0.0106...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Performing data assimilation at time 0.0106...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Performing data assimilation at time 0.0106...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: Updating the ensemble members...
4: Updating the ensemble members...
4: Done.
4: Done.
4: 30% completed
4: 30% completed
4: 30% completed
4: 40% completed
4: 40% completed
4: 40% completed
4: Performing data assimilation at time 0.0211...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Performing data assimilation at time 0.0211...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Performing data assimilation at time 0.0211...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: Updating the ensemble members...
4: Done.
4: Updating the ensemble members...
4: Done.
4: 50% completed
4: 50% completed
4: 50% completed
4: 60% completed
4: 60% completed
4: 60% completed
4: 70% completed
4: 70% completed
4: 70% completed
4: 80% completed
4: 80% completed
4: 80% completed
4: 90% completed
4: 90% completed
4: 90% completed
4: 100% completed
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 41262686us
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
4: 100% completed
4: 100% completed
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 41412227us
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 41413884us
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Starting the main time stepping loop...
4: 10% completed
4: 20% completed
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 2 | Old parameters for member 2: 
4: Rank: 1 | Old parameters for member 1: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 2 | Number expt sites mapped to DOFs: 1
4: Rank: 1 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: 40% completed
4: 50% completed
4: 60% completed
4: 70% completed
4: 80% completed
4: 90% completed
4: 100% completed
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Starting the main time stepping loop...
4: Starting the main time stepping loop...
4: Starting the main time stepping loop...
4: 10% completed
4: 10% completed
4: 10% completed
4: 20% completed
4: 20% completed
4: 20% completed
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: 40% completed
4: 40% completed
4: 40% completed
4: 50% completed
4: 50% completed
4: 50% completed
4: 60% completed
4: 60% completed
4: 60% completed
4: 70% completed
4: 70% completed
4: 70% completed
4: 80% completed
4: 80% completed
4: 80% completed
4: 90% completed
4: 90% completed
4: 90% completed
4: 100% completed
4: 100% completed
4: 100% completed
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 2043674us
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 1905747us
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 1906176us
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Starting the main time stepping loop...
4: 10% completed
4: 20% completed
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 1 | Old parameters for member 1: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 1 | Number expt sites mapped to DOFs: 1
4: Rank: 2 | Old parameters for member 2: 
4: Rank: 2 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: 40% completed
4: 50% completed
4: 60% completed
4: 70% completed
4: 80% completed
4: 90% completed
4: 100% completed
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Reading the experimental log file...
4: Done. Log entries found for 1 camera(s), with 1 frame(s).
4: Starting the main time stepping loop...
4: Starting the main time stepping loop...
4: Starting the main time stepping loop...
4: 10% completed
4: 10% completed
4: 10% completed
4: 20% completed
4: 20% completed
4: 20% completed
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Performing data assimilation at time 0.06...
4: Rank: 0 | Old parameters for member 0: 
4: Rank: 0 | Old parameters for member 1: 
4: Rank: 0 | Old parameters for member 2: 
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Rank: 0 | Number expt sites mapped to DOFs: 1
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Getting the perturbed innovation...
4: Applying the Kalman gain...
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: Updating the ensemble members...
4: Done.
4: 30% completed
4: 40% completed
4: 40% completed
4: 40% completed
4: 50% completed
4: 50% completed
4: 50% completed
4: 60% completed
4: 60% completed
4: 60% completed
4: 70% completed
4: 70% completed
4: 70% completed
4: 80% completed
4: 90% completed
4: 80% completed
4: 80% completed
4: 90% completed
4: 90% completed
4: 100% completed
4: 100% completed
4: 100% completed
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1864772us
4: 
4: *** No errors detected
4: Leaving test module "Integration_Data_Assimilation"; testing time: 45171308us
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1887461us
4: Leaving test module "Integration_Data_Assimilation"; testing time: 45205592us
4: 
4: *** No errors detected
4: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1887263us
4: 
4: *** No errors detected
4: Leaving test module "Integration_Data_Assimilation"; testing time: 45207554us
4: 
 3/45 Test  #4: test_integration_da_3 ..............   Passed   45.49 sec
test 5
      Start  5: test_integration_da_6

5: Test command: /opt/openmpi/bin/mpiexec "-n" "6" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_da"
5: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
5: Test timeout computed to be: 3600
5: Running 3 test cases...
5: Running 3 test cases...
5: Running 3 test cases...
5: Running 3 test cases...
5: Entering test module "Integration_Data_Assimilation"
5: Entering test module "Integration_Data_Assimilation"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
5: Entering test module "Integration_Data_Assimilation"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
5: Entering test module "Integration_Data_Assimilation"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
5: Running 3 test cases...
5: Running 3 test cases...
5: Entering test module "Integration_Data_Assimilation"
5: Entering test module "Integration_Data_Assimilation"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Entering test case "integration_data_assimilation"
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 2 frame(s).
5: Starting the main time stepping loop...
5: 10% completed
5: 20% completed
5: Rank: 5 | Old parameters for member 2: 
5: Rank: 4 | Old parameters for member 2: 
5: Performing data assimilation at time 0.0106...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 1 | Old parameters for member 0: 
5: Rank: 5 | Number expt sites mapped to DOFs: 1
5: Rank: 4 | Number expt sites mapped to DOFs: 1
5: Rank: 1 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 2 | Old parameters for member 1: 
5: Rank: 3 | Old parameters for member 1: 
5: Rank: 3 | Number expt sites mapped to DOFs: 1
5: Rank: 2 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: 40% completed
5: Rank: 4 | Old parameters for member 2: 
5: Rank: 5 | Old parameters for member 2: 
5: Rank: 1 | Old parameters for member 0: 
5: Performing data assimilation at time 0.0211...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 2 | Old parameters for member 1: 
5: Rank: 3 | Old parameters for member 1: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 1 | Number expt sites mapped to DOFs: 1
5: Rank: 4 | Number expt sites mapped to DOFs: 1
5: Rank: 5 | Number expt sites mapped to DOFs: 1
5: Rank: 2 | Number expt sites mapped to DOFs: 1
5: Rank: 3 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: 50% completed
5: 60% completed
5: 70% completed
5: 80% completed
5: 90% completed
5: 100% completed
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 2 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 2 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 2 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 2 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 2 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 2 frame(s).
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 20% completed
5: 20% completed
5: 20% completed
5: 20% completed
5: 20% completed
5: 20% completed
5: Performing data assimilation at time 0.0106...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.0106...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.0106...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.0106...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.0106...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.0106...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Updating the ensemble members...
5: Done.
5: Done.
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: 30% completed
5: 30% completed
5: 30% completed
5: 30% completed
5: 30% completed
5: 40% completed
5: 40% completed
5: 40% completed
5: 40% completed
5: 40% completed
5: 40% completed
5: Performing data assimilation at time 0.0211...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.0211...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.0211...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.0211...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.0211...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.0211...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Done.
5: Updating the ensemble members...
5: Done.
5: 50% completed
5: 50% completed
5: 50% completed
5: 50% completed
5: 50% completed
5: 50% completed
5: 60% completed
5: 60% completed
5: 60% completed
5: 60% completed
5: 60% completed
5: 60% completed
5: 70% completed
5: 70% completed
5: 70% completed
5: 70% completed
5: 70% completed
5: 70% completed
5: 80% completed
5: 80% completed
5: 80% completed
5: 80% completed
5: 80% completed
5: 80% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 100% completed
5: 100% completed
5: 100% completed
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 37977482us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 38039108us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 38039791us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
5: 100% completed
5: 100% completed
5: 100% completed
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 38381845us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 38397105us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(78): Leaving test case "integration_data_assimilation"; testing time: 38432317us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Entering test case "integration_3D_da_point_cloud_add_material"
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Starting the main time stepping loop...
5: 10% completed
5: 20% completed
5: Rank: 5 | Old parameters for member 2: 
5: Rank: 4 | Old parameters for member 2: 
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 1 | Old parameters for member 0: 
5: Rank: 5 | Number expt sites mapped to DOFs: 1
5: Rank: 4 | Number expt sites mapped to DOFs: 1
5: Rank: 1 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 2 | Old parameters for member 1: 
5: Rank: 3 | Old parameters for member 1: 
5: Rank: 3 | Number expt sites mapped to DOFs: 1
5: Rank: 2 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: 40% completed
5: 50% completed
5: 60% completed
5: 70% completed
5: 80% completed
5: 90% completed
5: 100% completed
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 20% completed
5: 10% completed
5: 20% completed
5: 20% completed
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: 20% completed
5: 20% completed
5: 20% completed
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: 40% completed
5: Updating the ensemble members...
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: Done.
5: 30% completed
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: 40% completed
5: 40% completed
5: 50% completed
5: 40% completed
5: 40% completed
5: 40% completed
5: 50% completed
5: 50% completed
5: 60% completed
5: 50% completed
5: 50% completed
5: 60% completed
5: 50% completed
5: 60% completed
5: 70% completed
5: 70% completed
5: 60% completed
5: 60% completed
5: 60% completed
5: 70% completed
5: 80% completed
5: 80% completed
5: 70% completed
5: 70% completed
5: 70% completed
5: 80% completed
5: 90% completed
5: 90% completed
5: 80% completed
5: 80% completed
5: 80% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 100% completed
5: 100% completed
5: 100% completed
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 2103956us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
5: 100% completed
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 2125536us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
5: 100% completed
5: 100% completed
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 2196322us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 1800799us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 1818707us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(148): Leaving test case "integration_3D_da_point_cloud_add_material"; testing time: 1770147us
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Entering test case "integration_3D_da_ray_add_material"
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Starting the main time stepping loop...
5: 10% completed
5: 20% completed
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 1 | Old parameters for member 0: 
5: Rank: 4 | Old parameters for member 2: 
5: Rank: 5 | Old parameters for member 2: 
5: Rank: 1 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 5 | Number expt sites mapped to DOFs: 1
5: Rank: 4 | Number expt sites mapped to DOFs: 1
5: Rank: 2 | Old parameters for member 1: 
5: Rank: 3 | Old parameters for member 1: 
5: Rank: 2 | Number expt sites mapped to DOFs: 1
5: Rank: 3 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: 40% completed
5: 50% completed
5: 60% completed
5: 70% completed
5: 80% completed
5: 90% completed
5: 100% completed
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Reading the experimental log file...
5: Done. Log entries found for 1 camera(s), with 1 frame(s).
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: Starting the main time stepping loop...
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 10% completed
5: 20% completed
5: 20% completed
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: 20% completed
5: 20% completed
5: 20% completed
5: 20% completed
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Performing data assimilation at time 0.06...
5: Rank: 0 | Old parameters for member 0: 
5: Rank: 0 | Old parameters for member 1: 
5: Rank: 0 | Old parameters for member 2: 
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Rank: 0 | Number expt sites mapped to DOFs: 1
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Getting the perturbed innovation...
5: Applying the Kalman gain...
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: Updating the ensemble members...
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: Done.
5: 30% completed
5: Updating the ensemble members...
5: Done.
5: 30% completed
5: 40% completed
5: 40% completed
5: 50% completed
5: 40% completed
5: 40% completed
5: 40% completed
5: 40% completed
5: 50% completed
5: 60% completed
5: 50% completed
5: 50% completed
5: 50% completed
5: 50% completed
5: 60% completed
5: 70% completed
5: 60% completed
5: 60% completed
5: 60% completed
5: 60% completed
5: 70% completed
5: 80% completed
5: 70% completed
5: 70% completed
5: 70% completed
5: 70% completed
5: 80% completed
5: 90% completed
5: 80% completed
5: 80% completed
5: 80% completed
5: 80% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 90% completed
5: 100% completed
5: 100% completed
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1816233us
5: Leaving test module "Integration_Data_Assimilation"; testing time: 41981048us
5: 
5: *** No errors detected
5: 100% completed
5: 100% completed
5: 100% completed
5: 100% completed
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1859003us
5: Leaving test module "Integration_Data_Assimilation"; testing time: 42002907us
5: 
5: *** No errors detected
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1825018us
5: Leaving test module "Integration_Data_Assimilation"; testing time: 42023129us
5: 
5: *** No errors detected
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1850268us
5: Leaving test module "Integration_Data_Assimilation"; testing time: 42024220us
5: 
5: *** No errors detected
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1824818us
5: Leaving test module "Integration_Data_Assimilation"; testing time: 42025526us
5: 
5: *** No errors detected
5: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da.cc(231): Leaving test case "integration_3D_da_ray_add_material"; testing time: 1824871us
5: Leaving test module "Integration_Data_Assimilation"; testing time: 42027521us
5: 
5: *** No errors detected
5: 
 4/45 Test  #5: test_integration_da_6 ..............   Passed   42.35 sec
test 6
      Start  6: test_data_assimilator_1

6: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_data_assimilator"
6: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
6: Test timeout computed to be: 3600
6: Running 1 test case...
6: Entering test module "DataAssimilator"
6: /var/jenkins/workspace/adamantine_PR-387/tests/test_data_assimilator.cc(948): Entering test case "data_assimilator"
6: Getting the perturbed innovation...
6: Applying the Kalman gain...
6: Updating the ensemble members...
6: Getting the perturbed innovation...
6: Applying the Kalman gain...
6: Updating the ensemble members...
6: /var/jenkins/workspace/adamantine_PR-387/tests/test_data_assimilator.cc(948): Leaving test case "data_assimilator"; testing time: 127827us
6: Leaving test module "DataAssimilator"; testing time: 127874us
6: 
6: *** No errors detected
6: 
 5/45 Test  #6: test_data_assimilator_1 ............   Passed    0.42 sec
test 7
      Start  7: test_experimental_data_1

7: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_experimental_data"
7: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
7: Test timeout computed to be: 3600
7: Running 6 test cases...
7: Entering test module "ExperimentaData"
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(22): Entering test case "read_experimental_data_point_cloud_from_file"
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(22): Leaving test case "read_experimental_data_point_cloud_from_file"; testing time: 15998us
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(75): Entering test case "set_vector_with_experimental_data_point_cloud"
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(75): Leaving test case "set_vector_with_experimental_data_point_cloud"; testing time: 7793us
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(139): Entering test case "read_experimental_data_ray_tracing_from_file"
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(139): Leaving test case "read_experimental_data_ray_tracing_from_file"; testing time: 5557us
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(191): Entering test case "timestamp"
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(191): Leaving test case "timestamp"; testing time: 861us
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(217): Entering test case "project_ray_data_on_mesh"
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(217): Leaving test case "project_ray_data_on_mesh"; testing time: 29927343us
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(294): Entering test case "project_ray_data_on_nonaligned_mesh"
7: /var/jenkins/workspace/adamantine_PR-387/tests/test_experimental_data.cc(294): Leaving test case "project_ray_data_on_nonaligned_mesh"; testing time: 26662us
7: Leaving test module "ExperimentaData"; testing time: 29985950us
7: 
7: *** No errors detected
7: 
 6/45 Test  #7: test_experimental_data_1 ...........   Passed   30.27 sec
test 8
      Start  8: test_geometry_1

8: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_geometry"
8: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
8: Test timeout computed to be: 3600
8: Running 4 test cases...
8: Entering test module "Geometry"
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(57): Entering test case "geometry_2D"
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(57): Leaving test case "geometry_2D"; testing time: 9299us
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(82): Entering test case "geometry_3D"
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(82): Leaving test case "geometry_3D"; testing time: 11417us
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(109): Entering test case "geometry_shifted_origin"
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(109): Leaving test case "geometry_shifted_origin"; testing time: 9059us
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(144): Entering test case "gmsh"
8: /var/jenkins/workspace/adamantine_PR-387/tests/test_geometry.cc(144): Leaving test case "gmsh"; testing time: 86439us
8: Leaving test module "Geometry"; testing time: 116637us
8: 
8: *** No errors detected
8: 
 7/45 Test  #8: test_geometry_1 ....................   Passed    0.40 sec
test 9
      Start  9: test_heat_source_1

9: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_heat_source"
9: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
9: Test timeout computed to be: 3600
9: Running 5 test cases...
9: Entering test module "HeatSource"
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(19): Entering test case "heat_source_value_2d"
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(19): Leaving test case "heat_source_value_2d"; testing time: 1299us
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(95): Entering test case "heat_source_vectorized_value_2d"
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(95): Leaving test case "heat_source_vectorized_value_2d"; testing time: 189us
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(225): Entering test case "heat_source_value_3d"
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(225): Leaving test case "heat_source_value_3d"; testing time: 211us
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(291): Entering test case "heat_source_vectorized_value_3d"
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(291): Leaving test case "heat_source_vectorized_value_3d"; testing time: 181us
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(427): Entering test case "heat_source_height"
9: /var/jenkins/workspace/adamantine_PR-387/tests/test_heat_source.cc(427): Leaving test case "heat_source_height"; testing time: 805us
9: Leaving test module "HeatSource"; testing time: 3616us
9: 
9: *** No errors detected
9: 
 8/45 Test  #9: test_heat_source_1 .................   Passed    0.28 sec
test 10
      Start 10: test_implicit_operator_1

10: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_implicit_operator"
10: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
10: Test timeout computed to be: 3600
10: Running 1 test case...
10: Entering test module "ImplicitOperator"
10: /var/jenkins/workspace/adamantine_PR-387/tests/test_implicit_operator.cc(28): Entering test case "implicit_operator"
10: /var/jenkins/workspace/adamantine_PR-387/tests/test_implicit_operator.cc(28): Leaving test case "implicit_operator"; testing time: 37448us
10: Leaving test module "ImplicitOperator"; testing time: 37501us
10: 
10: *** No errors detected
10: 
 9/45 Test #10: test_implicit_operator_1 ...........   Passed    0.32 sec
test 11
      Start 11: test_integration_3d_device_1

11: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_3d_device"
11: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
11: Test timeout computed to be: 3600
11: Running 2 test cases...
11: Entering test module "Integration_3D_Device"
11: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_device.cc(19): Entering test case "integration_3D_device"
11: 10% completed
11: 20% completed
11: 30% completed
11: 40% completed
11: 50% completed
11: 60% completed
11: 70% completed
11: 80% completed
11: 90% completed
11: 100% completed
11: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_device.cc(19): Leaving test case "integration_3D_device"; testing time: 312115559us
11: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_device.cc(46): Entering test case "integration_3D_checkpoint_restart_device"
11: 10% completed
11: 20% completed
11: 30% completed
11: 40% completed
11: 50% completed
11: 60% completed
11: 70% completed
11: Checkpoint reached
11: 80% completed
11: 90% completed
11: 100% completed
11: Restarting from file
11: 80% completed
11: 90% completed
11: 100% completed
11: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_device.cc(46): Leaving test case "integration_3D_checkpoint_restart_device"; testing time: 110142335us
11: Leaving test module "Integration_3D_Device"; testing time: 422258964us
11: 
11: *** No errors detected
11: 
10/45 Test #11: test_integration_3d_device_1 .......   Passed  422.55 sec
test 12
      Start 12: test_material_property_1

12: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_material_property"
12: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
12: Test timeout computed to be: 3600
12: Running 4 test cases...
12: Entering test module "MaterialProperty"
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(13): Entering test case "material_property_host"
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(13): Leaving test case "material_property_host"; testing time: 24053us
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(18): Entering test case "ratios_host"
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(18): Leaving test case "ratios_host"; testing time: 7593us
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(20): Entering test case "material_property_table_host"
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(20): Leaving test case "material_property_table_host"; testing time: 11586us
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(25): Entering test case "material_property_polynomials_host"
12: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property.cc(25): Leaving test case "material_property_polynomials_host"; testing time: 11043us
12: Leaving test module "MaterialProperty"; testing time: 54446us
12: 
12: *** No errors detected
12: 
11/45 Test #12: test_material_property_1 ...........   Passed    0.35 sec
test 13
      Start 13: test_material_property_device_1

13: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_material_property_device"
13: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
13: Test timeout computed to be: 3600
13: Running 4 test cases...
13: Entering test module "MaterialPropertyDevice"
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(13): Entering test case "material_property_device"
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(13): Leaving test case "material_property_device"; testing time: 24195us
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(18): Entering test case "ratios_device"
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(18): Leaving test case "ratios_device"; testing time: 7639us
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(20): Entering test case "material_property_table_device"
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(20): Leaving test case "material_property_table_device"; testing time: 9720us
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(25): Entering test case "material_property_polynomials_device"
13: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_property_device.cc(25): Leaving test case "material_property_polynomials_device"; testing time: 9620us
13: Leaving test module "MaterialPropertyDevice"; testing time: 51337us
13: 
13: *** No errors detected
13: 
12/45 Test #13: test_material_property_device_1 ....   Passed    0.35 sec
test 14
      Start 14: test_mechanical_operator_1

14: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_mechanical_operator"
14: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
14: Test timeout computed to be: 3600
14: Running 2 test cases...
14: Entering test module "MechanicalOperator"
14: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_operator.cc(49): Entering test case "elastostatic"
14: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_operator.cc(49): Leaving test case "elastostatic"; testing time: 8796699us
14: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_operator.cc(237): Entering test case "thermoelastic"
14: Test case thermoelastic did not check any assertions
14: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_operator.cc(237): Leaving test case "thermoelastic"; testing time: 2683544us
14: Leaving test module "MechanicalOperator"; testing time: 11481008us
14: 
14: *** No errors detected
14: 
13/45 Test #14: test_mechanical_operator_1 .........   Passed   11.78 sec
test 15
      Start 15: test_mechanical_physics_1

15: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_mechanical_physics"
15: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
15: Test timeout computed to be: 3600
15: Running 4 test cases...
15: Entering test module "MechanicalPhysics"
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(196): Entering test case "elastostatic"
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(196): Leaving test case "elastostatic"; testing time: 434414us
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(261): Entering test case "fe_nothing"
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(261): Leaving test case "fe_nothing"; testing time: 418455us
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(514): Entering test case "thermoelastic_eshelby"
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(514): Leaving test case "thermoelastic_eshelby"; testing time: 41505861us
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(542): Entering test case "elastoplastic"
15: Test case elastoplastic did not check any assertions
15: /var/jenkins/workspace/adamantine_PR-387/tests/test_mechanical_physics.cc(542): Leaving test case "elastoplastic"; testing time: 197639us
15: Leaving test module "MechanicalPhysics"; testing time: 42557128us
15: 
15: *** No errors detected
15: 
14/45 Test #15: test_mechanical_physics_1 ..........   Passed   42.85 sec
test 16
      Start 16: test_newton_solver_1

16: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_newton_solver"
16: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
16: Test timeout computed to be: 3600
16: Running 1 test case...
16: Entering test module "Newton_Solver"
16: /var/jenkins/workspace/adamantine_PR-387/tests/test_newton_solver.cc(33): Entering test case "newton_solver"
16: /var/jenkins/workspace/adamantine_PR-387/tests/test_newton_solver.cc(33): Leaving test case "newton_solver"; testing time: 1556us
16: Leaving test module "Newton_Solver"; testing time: 1756us
16: 
16: *** No errors detected
16: 
15/45 Test #16: test_newton_solver_1 ...............   Passed    0.29 sec
test 17
      Start 17: test_post_processor_1

17: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_post_processor"
17: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
17: Test timeout computed to be: 3600
17: Running 2 test cases...
17: Entering test module "PostProcessor"
17: /var/jenkins/workspace/adamantine_PR-387/tests/test_post_processor.cc(27): Entering test case "thermal_post_processor"
17: /var/jenkins/workspace/adamantine_PR-387/tests/test_post_processor.cc(27): Leaving test case "thermal_post_processor"; testing time: 49945us
17: /var/jenkins/workspace/adamantine_PR-387/tests/test_post_processor.cc(143): Entering test case "mechanical_post_processor"
17: /var/jenkins/workspace/adamantine_PR-387/tests/test_post_processor.cc(143): Leaving test case "mechanical_post_processor"; testing time: 2551901us
17: Leaving test module "PostProcessor"; testing time: 2601959us
17: 
17: *** No errors detected
17: 
16/45 Test #17: test_post_processor_1 ..............   Passed    2.85 sec
test 18
      Start 18: test_scan_path_1

18: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_scan_path"
18: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
18: Test timeout computed to be: 3600
18: Running 2 test cases...
18: Entering test module "ScanPath"
18: /var/jenkins/workspace/adamantine_PR-387/tests/test_scan_path.cc(36): Entering test case "scan_path"
18: /var/jenkins/workspace/adamantine_PR-387/tests/test_scan_path.cc(36): Leaving test case "scan_path"; testing time: 1804us
18: /var/jenkins/workspace/adamantine_PR-387/tests/test_scan_path.cc(78): Entering test case "scan_path_location"
18: /var/jenkins/workspace/adamantine_PR-387/tests/test_scan_path.cc(78): Leaving test case "scan_path_location"; testing time: 117us
18: Leaving test module "ScanPath"; testing time: 2324us
18: 
18: *** No errors detected
18: 
17/45 Test #18: test_scan_path_1 ...................   Passed    0.29 sec
test 19
      Start 19: test_thermal_operator_1

19: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_thermal_operator"
19: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
19: Test timeout computed to be: 3600
19: Running 6 test cases...
19: Entering test module "ThermalOperator"
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(41): Entering test case "thermal_operator"
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(41): Leaving test case "thermal_operator"; testing time: 37030us
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(149): Entering test case "spmv"
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(149): Leaving test case "spmv"; testing time: 76938us
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(261): Entering test case "spmv_anisotropic"
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(261): Leaving test case "spmv_anisotropic"; testing time: 78569us
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(405): Entering test case "spmv_anisotropic_angle"
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(405): Leaving test case "spmv_anisotropic_angle"; testing time: 453493us
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(564): Entering test case "spmv_rad"
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(564): Leaving test case "spmv_rad"; testing time: 641165us
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(751): Entering test case "spmv_conv"
19: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator.cc(751): Leaving test case "spmv_conv"; testing time: 639788us
19: Leaving test module "ThermalOperator"; testing time: 1929107us
19: 
19: *** No errors detected
19: 
18/45 Test #19: test_thermal_operator_1 ............   Passed    2.18 sec
test 20
      Start 20: test_thermal_operator_device_1

20: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_thermal_operator_device"
20: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
20: Test timeout computed to be: 3600
20: Running 4 test cases...
20: Entering test module "ThermalOperatorDevice"
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(31): Entering test case "thermal_operator_dev"
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(31): Leaving test case "thermal_operator_dev"; testing time: 24532us
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(125): Entering test case "spmv"
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(125): Leaving test case "spmv"; testing time: 71670us
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(232): Entering test case "mf_spmv"
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(232): Leaving test case "mf_spmv"; testing time: 787388us
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(364): Entering test case "spmv_anisotropic_angle"
20: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_operator_device.cc(364): Leaving test case "spmv_anisotropic_angle"; testing time: 490532us
20: Leaving test module "ThermalOperatorDevice"; testing time: 1375615us
20: 
20: *** No errors detected
20: 
19/45 Test #20: test_thermal_operator_device_1 .....   Passed    1.66 sec
test 21
      Start 21: test_thermal_physics_device_1

21: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_thermal_physics_device"
21: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
21: Test timeout computed to be: 3600
21: Running 5 test cases...
21: Entering test module "ThermalPhysicsDevice"
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(13): Entering test case "thermal_2d_explicit_device"
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(13): Leaving test case "thermal_2d_explicit_device"; testing time: 32135us
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(26): Entering test case "thermal_2d_implicit_device"
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(26): Leaving test case "thermal_2d_implicit_device"; testing time: 194594us
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(42): Entering test case "thermal_2d_manufactured_solution_device"
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(42): Leaving test case "thermal_2d_manufactured_solution_device"; testing time: 19996us
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(47): Entering test case "initial_temperature_device"
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(47): Leaving test case "initial_temperature_device"; testing time: 3918us
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(52): Entering test case "energy_conservation_device"
21: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics_device.cc(52): Leaving test case "energy_conservation_device"; testing time: 24033619us
21: Leaving test module "ThermalPhysicsDevice"; testing time: 24284565us
21: 
21: *** No errors detected
21: 
20/45 Test #21: test_thermal_physics_device_1 ......   Passed   24.53 sec
test 22
      Start 22: test_timer_1

22: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_timer"
22: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
22: Test timeout computed to be: 3600
22: Running 1 test case...
22: Entering test module "Timer"
22: /var/jenkins/workspace/adamantine_PR-387/tests/test_timer.cc(15): Entering test case "test_timer"
22: /var/jenkins/workspace/adamantine_PR-387/tests/test_timer.cc(15): Leaving test case "test_timer"; testing time: 600639us
22: Leaving test module "Timer"; testing time: 600711us
22: 
22: *** No errors detected
22: 
21/45 Test #22: test_timer_1 .......................   Passed    0.90 sec
test 23
      Start 23: test_utils_1

23: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_utils"
23: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
23: Test timeout computed to be: 3600
23: Running 1 test case...
23: Entering test module "utils"
23: /var/jenkins/workspace/adamantine_PR-387/tests/test_utils.cc(11): Entering test case "utils"
23: /var/jenkins/workspace/adamantine_PR-387/tests/test_utils.cc(11): Leaving test case "utils"; testing time: 194us
23: Leaving test module "utils"; testing time: 224us
23: 
23: *** No errors detected
23: 
22/45 Test #23: test_utils_1 .......................   Passed    0.29 sec
test 24
      Start 24: test_validate_input_database_1

24: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_validate_input_database"
24: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
24: Test timeout computed to be: 3600
24: Running 3 test cases...
24: Entering test module "validate_input_database"
24: /var/jenkins/workspace/adamantine_PR-387/tests/test_validate_input_database.cc(14): Entering test case "expected_passes"
24: Test case expected_passes did not check any assertions
24: /var/jenkins/workspace/adamantine_PR-387/tests/test_validate_input_database.cc(14): Leaving test case "expected_passes"; testing time: 464us
24: /var/jenkins/workspace/adamantine_PR-387/tests/test_validate_input_database.cc(50): Entering test case "parse_test_input_files"
24: Test case parse_test_input_files did not check any assertions
24: /var/jenkins/workspace/adamantine_PR-387/tests/test_validate_input_database.cc(50): Leaving test case "parse_test_input_files"; testing time: 4780us
24: /var/jenkins/workspace/adamantine_PR-387/tests/test_validate_input_database.cc(71): Entering test case "expected_failures"
24: /var/jenkins/workspace/adamantine_PR-387/tests/test_validate_input_database.cc(71): Leaving test case "expected_failures"; testing time: 4221us
24: Leaving test module "validate_input_database"; testing time: 9610us
24: 
24: *** No errors detected
24: 
23/45 Test #24: test_validate_input_database_1 .....   Passed    0.30 sec
test 25
      Start 25: test_integration_2d_1

25: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_2d"
25: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
25: Test timeout computed to be: 3600
25: Running 3 test cases...
25: Entering test module "Integration_2D"
25: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(19): Entering test case "integration_2D"
25: 10% completed
25: 20% completed
25: 30% completed
25: 40% completed
25: 50% completed
25: 60% completed
25: 70% completed
25: 80% completed
25: 90% completed
25: 100% completed
25: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(19): Leaving test case "integration_2D"; testing time: 1601084us
25: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(46): Entering test case "integration_2D_ensemble"
25: Starting the main time stepping loop...
25: 10% completed
25: 20% completed
25: 30% completed
25: 40% completed
25: 50% completed
25: 60% completed
25: 70% completed
25: 80% completed
25: 90% completed
25: 100% completed
25: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(46): Leaving test case "integration_2D_ensemble"; testing time: 4575253us
25: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(78): Entering test case "integration_2D_units"
25: 10% completed
25: 20% completed
25: 30% completed
25: 40% completed
25: 50% completed
25: 60% completed
25: 70% completed
25: 80% completed
25: 90% completed
25: 100% completed
25: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(78): Leaving test case "integration_2D_units"; testing time: 1963450us
25: Leaving test module "Integration_2D"; testing time: 8140546us
25: 
25: *** No errors detected
25: 
24/45 Test #25: test_integration_2d_1 ..............   Passed    8.43 sec
test 26
      Start 26: test_integration_2d_2

26: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_2d"
26: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
26: Test timeout computed to be: 3600
26: Running 3 test cases...
26: Entering test module "Integration_2D"
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(19): Entering test case "integration_2D"
26: Running 3 test cases...
26: Entering test module "Integration_2D"
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(19): Entering test case "integration_2D"
26: 10% completed
26: 20% completed
26: 30% completed
26: 40% completed
26: 50% completed
26: 60% completed
26: 70% completed
26: 80% completed
26: 90% completed
26: 100% completed
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(19): Leaving test case "integration_2D"; testing time: 1038065us
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(46): Entering test case "integration_2D_ensemble"
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(19): Leaving test case "integration_2D"; testing time: 1037387us
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(46): Entering test case "integration_2D_ensemble"
26: Starting the main time stepping loop...
26: 10% completed
26: 20% completed
26: 30% completed
26: 40% completed
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(46): Leaving test case "integration_2D_ensemble"; testing time: 1596328us
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(78): Entering test case "integration_2D_units"
26: 50% completed
26: 60% completed
26: 70% completed
26: 80% completed
26: 90% completed
26: 100% completed
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(46): Leaving test case "integration_2D_ensemble"; testing time: 2938615us
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(78): Entering test case "integration_2D_units"
26: 10% completed
26: 20% completed
26: 30% completed
26: 40% completed
26: 50% completed
26: 60% completed
26: 70% completed
26: 80% completed
26: 90% completed
26: 100% completed
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(78): Leaving test case "integration_2D_units"; testing time: 1186041us
26: Leaving test module "Integration_2D"; testing time: 5163442us
26: 
26: *** No errors detected
26: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d.cc(78): Leaving test case "integration_2D_units"; testing time: 2527932us
26: Leaving test module "Integration_2D"; testing time: 5162610us
26: 
26: *** No errors detected
26: 
25/45 Test #26: test_integration_2d_2 ..............   Passed    5.45 sec
test 27
      Start 27: test_integration_2d_device_1

27: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_2d_device"
27: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
27: Test timeout computed to be: 3600
27: Running 1 test case...
27: Entering test module "Integration_2D_Device"
27: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d_device.cc(19): Entering test case "intregation_2D_device"
27: 10% completed
27: 20% completed
27: 30% completed
27: 40% completed
27: 50% completed
27: 60% completed
27: 70% completed
27: 80% completed
27: 90% completed
27: 100% completed
27: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d_device.cc(19): Leaving test case "intregation_2D_device"; testing time: 3356825us
27: Leaving test module "Integration_2D_Device"; testing time: 3357069us
27: 
27: *** No errors detected
27: 
26/45 Test #27: test_integration_2d_device_1 .......   Passed    3.62 sec
test 28
      Start 28: test_integration_2d_device_2

28: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_2d_device"
28: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
28: Test timeout computed to be: 3600
28: Running 1 test case...
28: Entering test module "Integration_2D_Device"
28: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d_device.cc(19): Entering test case "intregation_2D_device"
28: Running 1 test case...
28: Entering test module "Integration_2D_Device"
28: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d_device.cc(19): Entering test case "intregation_2D_device"
28: 10% completed
28: 20% completed
28: 30% completed
28: 40% completed
28: 50% completed
28: 60% completed
28: 70% completed
28: 80% completed
28: 90% completed
28: 100% completed
28: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d_device.cc(19): Leaving test case "intregation_2D_device"; testing time: 1832508us
28: Leaving test module "Integration_2D_Device"; testing time: 1832762us
28: 
28: *** No errors detected
28: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_2d_device.cc(19): Leaving test case "intregation_2D_device"; testing time: 1832784us
28: Leaving test module "Integration_2D_Device"; testing time: 1833091us
28: 
28: *** No errors detected
28: 
27/45 Test #28: test_integration_2d_device_2 .......   Passed    2.11 sec
test 29
      Start 29: test_integration_3d_1

29: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_3d"
29: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
29: Test timeout computed to be: 3600
29: Running 4 test cases...
29: Entering test module "Integration_3D"
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(18): Entering test case "integration_3D"
29: 10% completed
29: 20% completed
29: 30% completed
29: 40% completed
29: 50% completed
29: 60% completed
29: 70% completed
29: 80% completed
29: 90% completed
29: 100% completed
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(18): Leaving test case "integration_3D"; testing time: 93179456us
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(96): Entering test case "integration_3D_short"
29: 10% completed
29: 20% completed
29: 30% completed
29: 40% completed
29: 50% completed
29: 60% completed
29: 70% completed
29: 80% completed
29: 90% completed
29: 100% completed
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(96): Leaving test case "integration_3D_short"; testing time: 885029193us
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(181): Entering test case "integration_3D_checkpoint_restart"
29: 10% completed
29: 20% completed
29: 30% completed
29: 40% completed
29: 50% completed
29: 60% completed
29: 70% completed
29: Checkpoint reached
29: 80% completed
29: 90% completed
29: 100% completed
29: Restarting from file
29: 80% completed
29: 90% completed
29: 100% completed
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(181): Leaving test case "integration_3D_checkpoint_restart"; testing time: 115263841us
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(231): Entering test case "hourglass"
29: Test case hourglass did not check any assertions
29: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(231): Leaving test case "hourglass"; testing time: 75us
29: Leaving test module "Integration_3D"; testing time: 1093474420us
29: 
29: *** No errors detected
29: 
28/45 Test #29: test_integration_3d_1 ..............   Passed  1093.74 sec
test 30
      Start 30: test_integration_3d_2

30: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_3d"
30: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
30: Test timeout computed to be: 3600
30: Running 4 test cases...
30: Running 4 test cases...
30: Entering test module "Integration_3D"
30: Entering test module "Integration_3D"
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(18): Entering test case "integration_3D"
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(18): Entering test case "integration_3D"
30: 10% completed
30: 20% completed
30: 30% completed
30: 40% completed
30: 50% completed
30: 60% completed
30: 70% completed
30: 80% completed
30: 90% completed
30: 100% completed
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(18): Leaving test case "integration_3D"; testing time: 50910558us
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(96): Entering test case "integration_3D_short"
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(18): Leaving test case "integration_3D"; testing time: 50910599us
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(96): Entering test case "integration_3D_short"
30: 10% completed
30: 20% completed
30: 30% completed
30: 40% completed
30: 50% completed
30: 60% completed
30: 70% completed
30: 80% completed
30: 90% completed
30: 100% completed
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(96): Leaving test case "integration_3D_short"; testing time: 486188492us
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(181): Entering test case "integration_3D_checkpoint_restart"
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(96): Leaving test case "integration_3D_short"; testing time: 486190068us
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(181): Entering test case "integration_3D_checkpoint_restart"
30: 10% completed
30: 20% completed
30: 30% completed
30: 40% completed
30: 50% completed
30: 60% completed
30: 70% completed
30: Checkpoint reached
30: 80% completed
30: 90% completed
30: 100% completed
30: Restarting from file
30: 80% completed
30: 90% completed
30: 100% completed
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(181): Leaving test case "integration_3D_checkpoint_restart"; testing time: 64479595us
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(231): Entering test case "hourglass"
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(181): Leaving test case "integration_3D_checkpoint_restart"; testing time: 64480885us
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(231): Entering test case "hourglass"
30: n_time_step: 1 time: 0 n_dofs after mesh refinement: 1172
30: 10% completed
30: n_time_step: 101 time: 1 n_dofs after cell activation: 1178
30: n_time_step: 124 time: 1.23 n_dofs after cell activation: 1181
30: n_time_step: 147 time: 1.46 n_dofs after cell activation: 1184
30: n_time_step: 171 time: 1.7 n_dofs after cell activation: 1187
30: n_time_step: 194 time: 1.93 n_dofs after cell activation: 1190
30: 20% completed
30: n_time_step: 217 time: 2.16 n_dofs after cell activation: 1193
30: n_time_step: 241 time: 2.4 n_dofs after cell activation: 1196
30: n_time_step: 264 time: 2.63 n_dofs after cell activation: 1199
30: n_time_step: 287 time: 2.86 n_dofs after cell activation: 1202
30: n_time_step: 301 time: 3 n_dofs after cell activation: 1204
30: 30% completed
30: n_time_step: 306 time: 3.05 n_dofs after cell activation: 1204
30: n_time_step: 325 time: 3.24 n_dofs after cell activation: 1205
30: n_time_step: 348 time: 3.47 n_dofs after cell activation: 1206
30: n_time_step: 371 time: 3.7 n_dofs after cell activation: 1207
30: n_time_step: 395 time: 3.94 n_dofs after cell activation: 1208
30: 40% completed
30: n_time_step: 418 time: 4.17 n_dofs after cell activation: 1209
30: n_time_step: 441 time: 4.4 n_dofs after cell activation: 1210
30: n_time_step: 465 time: 4.64 n_dofs after cell activation: 1211
30: n_time_step: 488 time: 4.87 n_dofs after cell activation: 1212
30: 50% completed
30: n_time_step: 507 time: 5.06 n_dofs after cell activation: 1216
30: n_time_step: 509 time: 5.08 n_dofs after cell activation: 1216
30: n_time_step: 531 time: 5.3 n_dofs after cell activation: 1217
30: n_time_step: 554 time: 5.53 n_dofs after cell activation: 1218
30: n_time_step: 577 time: 5.76 n_dofs after cell activation: 1219
30: n_time_step: 601 time: 6 n_dofs after cell activation: 1220
30: 60% completed
30: n_time_step: 624 time: 6.23 n_dofs after cell activation: 1221
30: n_time_step: 647 time: 6.46 n_dofs after cell activation: 1222
30: n_time_step: 671 time: 6.7 n_dofs after cell activation: 1223
30: n_time_step: 694 time: 6.93 n_dofs after cell activation: 1224
30: 70% completed
30: n_time_step: 717 time: 7.16 n_dofs after cell activation: 1226
30: n_time_step: 740 time: 7.39 n_dofs after cell activation: 1227
30: n_time_step: 763 time: 7.62 n_dofs after cell activation: 1228
30: n_time_step: 787 time: 7.86 n_dofs after cell activation: 1229
30: 80% completed
30: n_time_step: 810 time: 8.09 n_dofs after cell activation: 1230
30: n_time_step: 833 time: 8.32 n_dofs after cell activation: 1231
30: n_time_step: 857 time: 8.56 n_dofs after cell activation: 1232
30: n_time_step: 880 time: 8.79 n_dofs after cell activation: 1233
30: 90% completed
30: n_time_step: 903 time: 9.02 n_dofs after cell activation: 1234
30: n_time_step: 927 time: 9.26 n_dofs after cell activation: 1235
30: n_time_step: 928 time: 9.27 n_dofs after cell activation: 1238
30: n_time_step: 939 time: 9.38 n_dofs after cell activation: 1238
30: n_time_step: 951 time: 9.5 n_dofs after cell activation: 1239
30: n_time_step: 975 time: 9.74 n_dofs after cell activation: 1240
30: n_time_step: 998 time: 9.97 n_dofs after cell activation: 1241
30: 100% completed
30: Test case hourglass did not check any assertions
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(231): Leaving test case "hourglass"; testing time: 1682883873us
30: Leaving test module "Integration_3D"; testing time: 2284465712us
30: 
30: *** No errors detected
30: Test case hourglass did not check any assertions
30: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d.cc(231): Leaving test case "hourglass"; testing time: 1682898811us
30: Leaving test module "Integration_3D"; testing time: 2284480240us
30: 
30: *** No errors detected
30: 
29/45 Test #30: test_integration_3d_2 ..............   Passed  2284.76 sec
test 31
      Start 31: test_integration_3d_amr_1

31: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_3d_amr"
31: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
31: Test timeout computed to be: 3600
31: Running 2 test cases...
31: Entering test module "Integration_3D_AMR"
31: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(19): Entering test case "integration_3D_amr"
31: 10% completed
31: 20% completed
31: 30% completed
31: 40% completed
31: 50% completed
31: 60% completed
31: 70% completed
31: 80% completed
31: 90% completed
31: 100% completed
31: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(19): Leaving test case "integration_3D_amr"; testing time: 6365102us
31: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(60): Entering test case "integration_3D_amr_refine_coarsen"
31: 10% completed
31: 20% completed
31: 30% completed
31: 40% completed
31: 50% completed
31: 60% completed
31: 70% completed
31: 80% completed
31: 90% completed
31: 100% completed
31: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(60): Leaving test case "integration_3D_amr_refine_coarsen"; testing time: 91499114us
31: Leaving test module "Integration_3D_AMR"; testing time: 97864746us
31: 
31: *** No errors detected
31: 
30/45 Test #31: test_integration_3d_amr_1 ..........   Passed   98.49 sec
test 32
      Start 32: test_integration_3d_amr_2

32: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_3d_amr"
32: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
32: Test timeout computed to be: 3600
32: Running 2 test cases...
32: Running 2 test cases...
32: Entering test module "Integration_3D_AMR"
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(19): Entering test case "integration_3D_amr"
32: Entering test module "Integration_3D_AMR"
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(19): Entering test case "integration_3D_amr"
32: 10% completed
32: 20% completed
32: 30% completed
32: 40% completed
32: 50% completed
32: 60% completed
32: 70% completed
32: 80% completed
32: 90% completed
32: 100% completed
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(19): Leaving test case "integration_3D_amr"; testing time: 3719512us
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(60): Entering test case "integration_3D_amr_refine_coarsen"
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(19): Leaving test case "integration_3D_amr"; testing time: 3719491us
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(60): Entering test case "integration_3D_amr_refine_coarsen"
32: 10% completed
32: 20% completed
32: 30% completed
32: 40% completed
32: 50% completed
32: 60% completed
32: 70% completed
32: 80% completed
32: 90% completed
32: 100% completed
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(60): Leaving test case "integration_3D_amr_refine_coarsen"; testing time: 51813688us
32: Leaving test module "Integration_3D_AMR"; testing time: 55533725us
32: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr.cc(60): Leaving test case "integration_3D_amr_refine_coarsen"; testing time: 51813670us
32: Leaving test module "Integration_3D_AMR"; testing time: 55533724us
32: 
32: *** No errors detected
32: 
32: *** No errors detected
32: 
31/45 Test #32: test_integration_3d_amr_2 ..........   Passed   55.99 sec
test 33
      Start 33: test_integration_3d_amr_device_1

33: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_3d_amr_device"
33: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
33: Test timeout computed to be: 3600
33: Running 1 test case...
33: Entering test module "Integration_3D_AMR"
33: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr_device.cc(19): Entering test case "integration_3D_amr_device"
33: 10% completed
33: 20% completed
33: 30% completed
33: 40% completed
33: 50% completed
33: 60% completed
33: 70% completed
33: 80% completed
33: 90% completed
33: 100% completed
33: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr_device.cc(19): Leaving test case "integration_3D_amr_device"; testing time: 71759499us
33: Leaving test module "Integration_3D_AMR"; testing time: 71759752us
33: 
33: *** No errors detected
33: 
32/45 Test #33: test_integration_3d_amr_device_1 ...   Passed   72.45 sec
test 34
      Start 34: test_integration_3d_amr_device_2

34: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_3d_amr_device"
34: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
34: Test timeout computed to be: 3600
34: Running 1 test case...
34: Running 1 test case...
34: Entering test module "Integration_3D_AMR"
34: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr_device.cc(19): Entering test case "integration_3D_amr_device"
34: Entering test module "Integration_3D_AMR"
34: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr_device.cc(19): Entering test case "integration_3D_amr_device"
34: 10% completed
34: 20% completed
34: 30% completed
34: 40% completed
34: 50% completed
34: 60% completed
34: 70% completed
34: 80% completed
34: 90% completed
34: 100% completed
34: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr_device.cc(19): Leaving test case "integration_3D_amr_device"; testing time: 37832883us
34: 
34: *** No errors detected
34: Leaving test module "Integration_3D_AMR"; testing time: 37833151us
34: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_3d_amr_device.cc(19): Leaving test case "integration_3D_amr_device"; testing time: 37833059us
34: 
34: *** No errors detected
34: Leaving test module "Integration_3D_AMR"; testing time: 37833343us
34: 
33/45 Test #34: test_integration_3d_amr_device_2 ...   Passed   38.21 sec
test 35
      Start 35: test_integration_da_augmented_1

35: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_da_augmented"
35: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
35: Test timeout computed to be: 3600
35: Running 1 test case...
35: Entering test module "Integration_Data_Assimilation_Augmented"
35: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da_augmented.cc(19): Entering test case "integration_3D_data_assimilation_augmented"
35: Reading the experimental log file...
35: Done. Log entries found for 1 camera(s), with 2 frame(s).
35: Starting the main time stepping loop...
35: 10% completed
35: 20% completed
35: 30% completed
35: Performing data assimilation at time 0.0201...
35: Rank: 0 | Old parameters for member 0: 0.413453 
35: Rank: 0 | Old parameters for member 1: 0.385362 
35: Rank: 0 | Old parameters for member 2: 0.446065 
35: Rank: 0 | Number expt sites mapped to DOFs: 2
35: Getting the perturbed innovation...
35: Applying the Kalman gain...
35: Updating the ensemble members...
35: Done.
35: Rank: 0 | New parameters for member 0: 0.282614 
35: Rank: 0 | New parameters for member 1: 0.289052 
35: Rank: 0 | New parameters for member 2: 0.280003 
35: 40% completed
35: 50% completed
35: 60% completed
35: 70% completed
35: Performing data assimilation at time 0.04...
35: Rank: 0 | Old parameters for member 0: 0.282614 
35: Rank: 0 | Old parameters for member 1: 0.289052 
35: Rank: 0 | Old parameters for member 2: 0.280003 
35: Rank: 0 | Number expt sites mapped to DOFs: 2
35: Getting the perturbed innovation...
35: Applying the Kalman gain...
35: Updating the ensemble members...
35: Done.
35: Rank: 0 | New parameters for member 0: 0.309135 
35: Rank: 0 | New parameters for member 1: 0.305301 
35: Rank: 0 | New parameters for member 2: 0.312213 
35: 80% completed
35: 90% completed
35: 100% completed
35: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da_augmented.cc(19): Leaving test case "integration_3D_data_assimilation_augmented"; testing time: 32081201us
35: Leaving test module "Integration_Data_Assimilation_Augmented"; testing time: 32081838us
35: 
35: *** No errors detected
35: 
34/45 Test #35: test_integration_da_augmented_1 ....   Passed   32.67 sec
test 36
      Start 36: test_integration_da_augmented_2

36: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_da_augmented"
36: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
36: Test timeout computed to be: 3600
36: Running 1 test case...
36: Entering test module "Integration_Data_Assimilation_Augmented"
36: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da_augmented.cc(19): Entering test case "integration_3D_data_assimilation_augmented"
36: Running 1 test case...
36: Entering test module "Integration_Data_Assimilation_Augmented"
36: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da_augmented.cc(19): Entering test case "integration_3D_data_assimilation_augmented"
36: Reading the experimental log file...
36: Done. Log entries found for 1 camera(s), with 2 frame(s).
36: Starting the main time stepping loop...
36: 10% completed
36: 20% completed
36: Rank: 1 | Old parameters for member 2: 0.446065 
36: Rank: 1 | Number expt sites mapped to DOFs: 2
36: 30% completed
36: Performing data assimilation at time 0.0201...
36: Rank: 0 | Old parameters for member 0: 0.413453 
36: Rank: 0 | Old parameters for member 1: 0.385362 
36: Rank: 0 | Number expt sites mapped to DOFs: 2
36: Getting the perturbed innovation...
36: Applying the Kalman gain...
36: Updating the ensemble members...
36: Rank: 1 | New parameters for member 2: 0.280003 
36: Done.
36: Rank: 0 | New parameters for member 0: 0.282614 
36: Rank: 0 | New parameters for member 1: 0.289052 
36: 40% completed
36: 50% completed
36: 60% completed
36: Rank: 1 | Old parameters for member 2: 0.280003 
36: Rank: 1 | Number expt sites mapped to DOFs: 2
36: 70% completed
36: Performing data assimilation at time 0.04...
36: Rank: 0 | Old parameters for member 0: 0.282614 
36: Rank: 0 | Old parameters for member 1: 0.289052 
36: Rank: 0 | Number expt sites mapped to DOFs: 2
36: Getting the perturbed innovation...
36: Applying the Kalman gain...
36: Updating the ensemble members...
36: Rank: 1 | New parameters for member 2: 0.312213 
36: Done.
36: Rank: 0 | New parameters for member 0: 0.309135 
36: Rank: 0 | New parameters for member 1: 0.305301 
36: 80% completed
36: 90% completed
36: 100% completed
36: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da_augmented.cc(19): Leaving test case "integration_3D_data_assimilation_augmented"; testing time: 23101391us
36: Leaving test module "Integration_Data_Assimilation_Augmented"; testing time: 23101696us
36: 
36: *** No errors detected
36: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_da_augmented.cc(19): Leaving test case "integration_3D_data_assimilation_augmented"; testing time: 23101220us
36: Leaving test module "Integration_Data_Assimilation_Augmented"; testing time: 23101633us
36: 
36: *** No errors detected
36: 
35/45 Test #36: test_integration_da_augmented_2 ....   Passed   23.42 sec
test 37
      Start 37: test_integration_thermoelastic_1

37: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_thermoelastic"
37: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
37: Test timeout computed to be: 3600
37: Running 2 test cases...
37: Entering test module "Integration_Thermoelastic"
37: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(19): Entering test case "integration_thermoelastic"
37: 10% completed
37: 20% completed
37: 30% completed
37: 40% completed
37: 50% completed
37: 60% completed
37: 70% completed
37: 80% completed
37: 90% completed
37: 100% completed
37: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(19): Leaving test case "integration_thermoelastic"; testing time: 125192773us
37: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(47): Entering test case "integration_thermoelastic_add_material"
37: 10% completed
37: 20% completed
37: 30% completed
37: 40% completed
37: 50% completed
37: 60% completed
37: 70% completed
37: 80% completed
37: 90% completed
37: 100% completed
37: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(47): Leaving test case "integration_thermoelastic_add_material"; testing time: 80877825us
37: Leaving test module "Integration_Thermoelastic"; testing time: 206071599us
37: 
37: *** No errors detected
37: 
36/45 Test #37: test_integration_thermoelastic_1 ...   Passed  206.64 sec
test 38
      Start 38: test_integration_thermoelastic_2

38: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_integration_thermoelastic"
38: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
38: Test timeout computed to be: 3600
38: Running 2 test cases...
38: Entering test module "Integration_Thermoelastic"
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(19): Entering test case "integration_thermoelastic"
38: Running 2 test cases...
38: Entering test module "Integration_Thermoelastic"
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(19): Entering test case "integration_thermoelastic"
38: 10% completed
38: 20% completed
38: 30% completed
38: 40% completed
38: 50% completed
38: 60% completed
38: 70% completed
38: 80% completed
38: 90% completed
38: 100% completed
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(19): Leaving test case "integration_thermoelastic"; testing time: 65343332us
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(47): Entering test case "integration_thermoelastic_add_material"
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(19): Leaving test case "integration_thermoelastic"; testing time: 65343064us
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(47): Entering test case "integration_thermoelastic_add_material"
38: 10% completed
38: 20% completed
38: 30% completed
38: 40% completed
38: 50% completed
38: 60% completed
38: 70% completed
38: 80% completed
38: 90% completed
38: 100% completed
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(47): Leaving test case "integration_thermoelastic_add_material"; testing time: 42274883us
38: Leaving test module "Integration_Thermoelastic"; testing time: 107618946us
38: /var/jenkins/workspace/adamantine_PR-387/tests/test_integration_thermoelastic.cc(47): Leaving test case "integration_thermoelastic_add_material"; testing time: 42274685us
38: Leaving test module "Integration_Thermoelastic"; testing time: 107618700us
38: 
38: *** No errors detected
38: 
38: *** No errors detected
38: 
37/45 Test #38: test_integration_thermoelastic_2 ...   Passed  108.04 sec
test 39
      Start 39: test_material_deposition_1

39: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_material_deposition"
39: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
39: Test timeout computed to be: 3600
39: Running 10 test cases...
39: Entering test module "MaterialDeposition"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(50): Entering test case "read_material_deposition_file_2d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(50): Leaving test case "read_material_deposition_file_2d"; testing time: 1232us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(92): Entering test case "read_material_deposition_file_3d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(92): Leaving test case "read_material_deposition_file_3d"; testing time: 2434us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(134): Entering test case "get_elements_to_activate_2d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(134): Leaving test case "get_elements_to_activate_2d"; testing time: 17040us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(195): Entering test case "get_elements_to_activate_3d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(195): Leaving test case "get_elements_to_activate_3d"; testing time: 156140us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(262): Entering test case "material_deposition"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(262): Leaving test case "material_deposition"; testing time: 8879427us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(390): Entering test case "deposition_from_scan_path_2d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(390): Leaving test case "deposition_from_scan_path_2d"; testing time: 8654us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(440): Entering test case "deposition_from_scan_path_3d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(440): Leaving test case "deposition_from_scan_path_3d"; testing time: 192us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(494): Entering test case "deposition_from_L_scan_path_3d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(494): Leaving test case "deposition_from_L_scan_path_3d"; testing time: 1526us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(581): Entering test case "deposition_from_diagonal_scan_path_3d"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(581): Leaving test case "deposition_from_diagonal_scan_path_3d"; testing time: 1220us
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(635): Entering test case "merge_multiple_deposition_paths"
39: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(635): Leaving test case "merge_multiple_deposition_paths"; testing time: 108us
39: Leaving test module "MaterialDeposition"; testing time: 9069544us
39: 
39: *** No errors detected
39: 
38/45 Test #39: test_material_deposition_1 .........   Passed    9.71 sec
test 40
      Start 40: test_material_deposition_2

40: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_material_deposition"
40: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
40: Test timeout computed to be: 3600
40: Running 10 test cases...
40: Entering test module "MaterialDeposition"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(50): Entering test case "read_material_deposition_file_2d"
40: Running 10 test cases...
40: Entering test module "MaterialDeposition"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(50): Entering test case "read_material_deposition_file_2d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(50): Leaving test case "read_material_deposition_file_2d"; testing time: 298us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(92): Entering test case "read_material_deposition_file_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(50): Leaving test case "read_material_deposition_file_2d"; testing time: 336us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(92): Entering test case "read_material_deposition_file_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(92): Leaving test case "read_material_deposition_file_3d"; testing time: 181us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(134): Test case "get_elements_to_activate_2d" is skipped because precondition failed: the test only works in serial
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(195): Test case "get_elements_to_activate_3d" is skipped because precondition failed: the test only works in serial
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(262): Entering test case "material_deposition"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(92): Leaving test case "read_material_deposition_file_3d"; testing time: 214us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(134): Test case "get_elements_to_activate_2d" is skipped because precondition failed: the test only works in serial
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(195): Test case "get_elements_to_activate_3d" is skipped because precondition failed: the test only works in serial
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(262): Entering test case "material_deposition"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(262): Leaving test case "material_deposition"; testing time: 6004133us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(390): Entering test case "deposition_from_scan_path_2d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(390): Leaving test case "deposition_from_scan_path_2d"; testing time: 232us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(440): Entering test case "deposition_from_scan_path_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(262): Leaving test case "material_deposition"; testing time: 6004620us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(390): Entering test case "deposition_from_scan_path_2d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(440): Leaving test case "deposition_from_scan_path_3d"; testing time: 177us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(494): Entering test case "deposition_from_L_scan_path_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(494): Leaving test case "deposition_from_L_scan_path_3d"; testing time: 194us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(581): Entering test case "deposition_from_diagonal_scan_path_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(390): Leaving test case "deposition_from_scan_path_2d"; testing time: 292us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(440): Entering test case "deposition_from_scan_path_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(581): Leaving test case "deposition_from_diagonal_scan_path_3d"; testing time: 168us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(635): Entering test case "merge_multiple_deposition_paths"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(440): Leaving test case "deposition_from_scan_path_3d"; testing time: 175us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(494): Entering test case "deposition_from_L_scan_path_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(635): Leaving test case "merge_multiple_deposition_paths"; testing time: 125us
40: Leaving test module "MaterialDeposition"; testing time: 6007037us
40: 
40: *** No errors detected
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(494): Leaving test case "deposition_from_L_scan_path_3d"; testing time: 194us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(581): Entering test case "deposition_from_diagonal_scan_path_3d"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(581): Leaving test case "deposition_from_diagonal_scan_path_3d"; testing time: 162us
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(635): Entering test case "merge_multiple_deposition_paths"
40: /var/jenkins/workspace/adamantine_PR-387/tests/test_material_deposition.cc(635): Leaving test case "merge_multiple_deposition_paths"; testing time: 118us
40: Leaving test module "MaterialDeposition"; testing time: 6007684us
40: 
40: *** No errors detected
40: 
39/45 Test #40: test_material_deposition_2 .........   Passed    6.30 sec
test 41
      Start 41: test_microstructure_1

41: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_microstructure"
41: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
41: Test timeout computed to be: 3600
41: Running 1 test case...
41: Entering test module "MicroStructure"
41: /var/jenkins/workspace/adamantine_PR-387/tests/test_microstructure.cc(53): Entering test case "G_and_R"
41: /var/jenkins/workspace/adamantine_PR-387/tests/test_microstructure.cc(53): Leaving test case "G_and_R"; testing time: 38038us
41: Leaving test module "MicroStructure"; testing time: 38099us
41: 
41: *** No errors detected
41: 
40/45 Test #41: test_microstructure_1 ..............   Passed    0.48 sec
test 42
      Start 42: test_microstructure_2

42: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_microstructure"
42: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
42: Test timeout computed to be: 3600
42: Running 1 test case...
42: Entering test module "MicroStructure"
42: /var/jenkins/workspace/adamantine_PR-387/tests/test_microstructure.cc(53): Entering test case "G_and_R"
42: Running 1 test case...
42: Entering test module "MicroStructure"
42: /var/jenkins/workspace/adamantine_PR-387/tests/test_microstructure.cc(53): Entering test case "G_and_R"
42: Test case G_and_R did not check any assertions
42: /var/jenkins/workspace/adamantine_PR-387/tests/test_microstructure.cc(53): Leaving test case "G_and_R"; testing time: 34565us
42: Leaving test module "MicroStructure"; testing time: 34632us
42: 
42: *** No errors detected
42: /var/jenkins/workspace/adamantine_PR-387/tests/test_microstructure.cc(53): Leaving test case "G_and_R"; testing time: 35264us
42: Leaving test module "MicroStructure"; testing time: 35310us
42: 
42: *** No errors detected
42: 
41/45 Test #42: test_microstructure_2 ..............   Passed    0.33 sec
test 43
      Start 43: test_thermal_physics_1

43: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_thermal_physics"
43: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
43: Test timeout computed to be: 3600
43: Running 8 test cases...
43: Entering test module "ThermalPhysics"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(13): Entering test case "thermal_2d_explicit_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(13): Leaving test case "thermal_2d_explicit_host"; testing time: 32390us
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(26): Entering test case "thermal_2d_implicit_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(26): Leaving test case "thermal_2d_implicit_host"; testing time: 72866us
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(42): Entering test case "thermal_2d_manufactured_solution_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(42): Leaving test case "thermal_2d_manufactured_solution_host"; testing time: 17308us
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(47): Entering test case "initial_temperature_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(47): Leaving test case "initial_temperature_host"; testing time: 5833us
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(52): Entering test case "energy_conservation_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(52): Leaving test case "energy_conservation_host"; testing time: 3068166us
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(57): Entering test case "radiation_bcs_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(57): Leaving test case "radiation_bcs_host"; testing time: 1457010us
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(62): Entering test case "convection_bcs_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(62): Leaving test case "convection_bcs_host"; testing time: 10802120us
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(67): Entering test case "reference_temperature_host"
43: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(67): Leaving test case "reference_temperature_host"; testing time: 7966us
43: Leaving test module "ThermalPhysics"; testing time: 15464061us
43: 
43: *** No errors detected
43: 
42/45 Test #43: test_thermal_physics_1 .............   Passed   15.89 sec
test 44
      Start 44: test_thermal_physics_2

44: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_thermal_physics"
44: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
44: Test timeout computed to be: 3600
44: Running 8 test cases...
44: Entering test module "ThermalPhysics"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(13): Entering test case "thermal_2d_explicit_host"
44: Running 8 test cases...
44: Entering test module "ThermalPhysics"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(13): Entering test case "thermal_2d_explicit_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(13): Leaving test case "thermal_2d_explicit_host"; testing time: 39789us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(26): Entering test case "thermal_2d_implicit_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(13): Leaving test case "thermal_2d_explicit_host"; testing time: 39791us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(26): Entering test case "thermal_2d_implicit_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(26): Leaving test case "thermal_2d_implicit_host"; testing time: 459889us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(42): Entering test case "thermal_2d_manufactured_solution_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(26): Leaving test case "thermal_2d_implicit_host"; testing time: 459832us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(42): Entering test case "thermal_2d_manufactured_solution_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(42): Leaving test case "thermal_2d_manufactured_solution_host"; testing time: 16096us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(47): Entering test case "initial_temperature_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(42): Leaving test case "thermal_2d_manufactured_solution_host"; testing time: 15914us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(47): Entering test case "initial_temperature_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(47): Leaving test case "initial_temperature_host"; testing time: 6453us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(52): Entering test case "energy_conservation_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(47): Leaving test case "initial_temperature_host"; testing time: 6473us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(52): Entering test case "energy_conservation_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(52): Leaving test case "energy_conservation_host"; testing time: 1645903us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(57): Entering test case "radiation_bcs_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(52): Leaving test case "energy_conservation_host"; testing time: 1646087us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(57): Entering test case "radiation_bcs_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(57): Leaving test case "radiation_bcs_host"; testing time: 904104us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(62): Entering test case "convection_bcs_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(57): Leaving test case "radiation_bcs_host"; testing time: 904117us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(62): Entering test case "convection_bcs_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(62): Leaving test case "convection_bcs_host"; testing time: 6849728us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(67): Entering test case "reference_temperature_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(62): Leaving test case "convection_bcs_host"; testing time: 6849679us
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(67): Entering test case "reference_temperature_host"
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(67): Leaving test case "reference_temperature_host"; testing time: 8722us
44: Leaving test module "ThermalPhysics"; testing time: 9931115us
44: 
44: *** No errors detected
44: /var/jenkins/workspace/adamantine_PR-387/tests/test_thermal_physics.cc(67): Leaving test case "reference_temperature_host"; testing time: 10179us
44: Leaving test module "ThermalPhysics"; testing time: 9932538us
44: 
44: *** No errors detected
44: 
43/45 Test #44: test_thermal_physics_2 .............   Passed   10.24 sec
test 45
      Start 45: test_ensemble_management_1

45: Test command: /opt/openmpi/bin/mpiexec "-n" "1" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_ensemble_management"
45: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
45: Test timeout computed to be: 3600
45: Running 1 test case...
45: Entering test module "EnsembleManagement"
45: /var/jenkins/workspace/adamantine_PR-387/tests/test_ensemble_management.cc(17): Entering test case "database_ensemble"
45: /var/jenkins/workspace/adamantine_PR-387/tests/test_ensemble_management.cc(17): Leaving test case "database_ensemble"; testing time: 3388us
45: Leaving test module "EnsembleManagement"; testing time: 3418us
45: 
45: *** No errors detected
45: 
44/45 Test #45: test_ensemble_management_1 .........   Passed    0.42 sec
test 46
      Start 46: test_ensemble_management_2

46: Test command: /opt/openmpi/bin/mpiexec "-n" "2" "/var/jenkins/workspace/adamantine_PR-387/build/bin/test_ensemble_management"
46: Working Directory: /var/jenkins/workspace/adamantine_PR-387/build/tests
46: Test timeout computed to be: 3600
46: Running 1 test case...
46: Entering test module "EnsembleManagement"
46: /var/jenkins/workspace/adamantine_PR-387/tests/test_ensemble_management.cc(17): Entering test case "database_ensemble"
46: Running 1 test case...
46: Entering test module "EnsembleManagement"
46: /var/jenkins/workspace/adamantine_PR-387/tests/test_ensemble_management.cc(17): Entering test case "database_ensemble"
46: /var/jenkins/workspace/adamantine_PR-387/tests/test_ensemble_management.cc(17): Leaving test case "database_ensemble"; testing time: 1328us
46: Leaving test module "EnsembleManagement"; testing time: 1362us
46: 
46: *** No errors detected
46: /var/jenkins/workspace/adamantine_PR-387/tests/test_ensemble_management.cc(17): Leaving test case "database_ensemble"; testing time: 2468us
46: Leaving test module "EnsembleManagement"; testing time: 2500us
46: 
46: *** No errors detected
46: 
45/45 Test #46: test_ensemble_management_2 .........   Passed    0.28 sec

The following tests passed:
	test_integration_da_1
	test_integration_da_2
	test_integration_da_3
	test_integration_da_6
	test_data_assimilator_1
	test_experimental_data_1
	test_geometry_1
	test_heat_source_1
	test_implicit_operator_1
	test_integration_3d_device_1
	test_material_property_1
	test_material_property_device_1
	test_mechanical_operator_1
	test_mechanical_physics_1
	test_newton_solver_1
	test_post_processor_1
	test_scan_path_1
	test_thermal_operator_1
	test_thermal_operator_device_1
	test_thermal_physics_device_1
	test_timer_1
	test_utils_1
	test_validate_input_database_1
	test_integration_2d_1
	test_integration_2d_2
	test_integration_2d_device_1
	test_integration_2d_device_2
	test_integration_3d_1
	test_integration_3d_2
	test_integration_3d_amr_1
	test_integration_3d_amr_2
	test_integration_3d_amr_device_1
	test_integration_3d_amr_device_2
	test_integration_da_augmented_1
	test_integration_da_augmented_2
	test_integration_thermoelastic_1
	test_integration_thermoelastic_2
	test_material_deposition_1
	test_material_deposition_2
	test_microstructure_1
	test_microstructure_2
	test_thermal_physics_1
	test_thermal_physics_2
	test_ensemble_management_1
	test_ensemble_management_2

100% tests passed, 0 tests failed out of 45

Total Test time (real) = 4823.40 sec